Saturday, June 7, 2014

Taper Pin Reamers

High Speed Steel Taper Pin Reamers are manufactured with a taper of 1/4" per foot. They are used to ream holes into which standard taper pins will fit. The point of each reamer will enter hole reamed by next smaller size. Hole to be reamed should be a few thousandths smaller than the small diameter of the finished reamed hole. HIGH SPEED STEEL TPRSF TPRSP TPRHF Hand Hand Machine For use in easy to ream materials.


ITEM NO. FLUTE STYLE DESIGN USE REAMING APPLICATION For use in hard to ream materials and where the reamer tends to wedge itself. For machine reaming of holes for taper pins on a production basis. Helical design throws the chips forward to alleviate packing of the flutes. TAPER PIN DRILL/REAMERS 118° POINT High Speed Steel Taper Pin Drill/Reamers are designed to drill and ream tapered holes in metal to fit taper pins in one operation. They are made with an included taper of 1 in 48 (1/4" per foot) and have chip breakers along the cutting edge. ICS WIS SPECIAL PURPOSE HIGH SPEED STEEL Straight (Right Hand) Flute Spiral (Left Hand) Flute Helical (Left Hand) Flute DUAL PURPOSE TAPERED FLUTES RIGHT HAND CUT 5/64 7/0 .0497 .0666 13/16 1-13/16 4 $21.82 $25.48 $22.84 3/32 6/0 .0611 .0806 15/16 1-15/16 4 21.82 25.48 21.26 7/64 5/0 .0719 .0966 1-3/16 2-3/16 4 22.38 24.44 24.73 1/8 4/0 .0869 .1142 1-5/16 2-5/16 4 22.38 24.00 22.02 9/64 3/0 .1029 .1302 1-5/16 2-5/16 4 22.38 24.44 19.90 5/32 2/0 .1137 .1462 1-9/16 2-9/16 4 20.00 21.34 19.14 11/64 0 .1287 .1638 1-11/16 2-15/16 6 19.18 20.56 19.90 3/16 1 .1447 .1798 1-11/16 2-15/16 6 18.72 20.78 21.02 13/64 2 .1605 .2008 1-15/16 3-3/16 6 18.72 21.08 23.94 15/64 3 .1813 .2294 2-5/16 3-11/16 6 18.72 21.08 24.62 17/64 4 .2071 .2604 2-9/16 4-1/16 6 20.78 22.56 29.98 5/16 5 .2409 .2994 2-13/16 4-5/16 6 22.38 24.30 32.08 23/64 6 .2773 .3540 3-11/16 5-7/16 6 26.94 29.84 37.66 13/32 7 .3297 .4220 4-7/16 6-5/16 6 34.64 37.52 45.28 7/16 8 .3971 .5050 5-3/16 7-3/16 6 44.24 48.48 52.30 9/16 9 .4805 .6066 6-1/16 8-5/16 6 53.82 58.60 56.22 5/8 10 .5799 .7216 6-13/16 9-5/16 6 59.16 65.00 74.74 7/8 11 .7060 .8780 8-1/4 11-1/4 6 1 12 .8420 1.0500 10 13-5/8 6 1-1/4 13 1.0090 1.2590 12 16 6 1-1/2 14 1.2500 1.5420 14 18-1/4 6 NOMINAL SIZE PIN SIZE NO. SMALL END LARGE END FLUTE LENGTH OVERALL LENGTH NO. OF FLUTES STRAIGHT FLUTE TPRSF HELICAL FLUTE TPRHF TAPERED FLUTES TPD/R SPIRAL FLUTE TPRSP DIAMETER PRICE EACH SIZE SMALL END LARGE END FLUTE LENGTH OVERALL LENGTH FOR NO. SIZE PRICE 3/32 .0664 .095 1-3/8 2-9/16 5/0 $51.88 7/64 .0772 .111 1-5/8 2-7/8 4/0 51.88 1/8 .0879 .127 1-7/8 3-1/8 3/0 41.42 9/64 .1013 .143 2 3-1/4 2/0 66.70 5/32 .1137 .158 2-1/8 3-3/8 0 47.40 11/64 .1245 .174 2-3/8 3-3/4 1 76.50 3/16 .1325 .195 3 4-3/8 2 63.70 7/32 .1575 .220 3 4-1/2 3 97.96 1/4 .1775 .253 3-5/8 5-1/4 4 72.68 9/32 .1983 .292 4-1/2 6-1/4 5 122.90 5/16 .2223 .316 4-1/2 6-3/8 - 102.36 11/32 .2455 .347 4-7/8 6-7/8 6 178.54 3/8 .2664 .381 5-1/2 7-3/4 - 126.06 13/32 .2818 .412 6-1/4 8-1/2 7 197.48 7/16 .3128 .443 6-1/4 8-7/8 - 159.56 1/2 .3600 .506 7 9-3/4 8 197.48 5/8 .4638 .633 8-1/8 11-3/8 9 394.96 3/4 .5647 .760 9-3/8 12-7/8 10 444.86

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.